Wheel nave. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
6.1. Forward suspension bracket
6.1.1. Features of a design of a forward suspension bracket
6.1.2. Check and adjustment of parameters of the unit of forward wheels
6.1.3. Corner of a longitudinal inclination of an axis of turn
6.1.4. Corner of disorder of forward wheels
6.1.5. Convergence of forward wheels
6.1.6. Removal of knots of a forward suspension bracket
6.1.6.1. Telescopic rack
6.1.6.2. Rotary fist
6.1.6.3. Wheel nave
6.1.6.4. Stabilizer and levers
6.1.6.5. Spring of a forward suspension bracket
6.1.6.6. Support of a telescopic rack
6.1.6.7. Lever of a forward suspension bracket
6.1.6.8. Spherical hinge
6.1.6.9. Fist of a telescopic rack
6.1.7. Installation of details and knots of a forward suspension bracket on the car
6.1.8. Dismantling of a telescopic rack
6.1.9. Damping racks of a forward suspension bracket
6.1.10. Possible malfunctions of a forward suspension bracket
6.2. Back suspension bracket
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

6-1-6-3-stupica-kolesa.html

6.1.6.3. Wheel nave

Vypressovka of a nave

1 – adaptation bracket;

2 – wheel bolt;

3 – screw;

4 – floating heel;

5 – pin

PERFORMANCE ORDER
1. At damage of a nave or the bearing it is necessary to remove a rotary fist with brakes and a nave in collecting (see subsection 6.1.6.2).
2. To Vypressovat a nave 35 (see rice. A forward suspension bracket of the car) from internal rings of the bearing 33 by means of a stripper (see fig. of Vypressovk of a nave).
3. Before a vypressovka of the bearing it is necessary to clear internal cavities of a nave to exclude teases on landing surfaces under the bearing, and to remove from a rotary fist a bracket 2 (see rice. Removal of a rotary fist) brakes and the disk 3 of a brake fixed by pins.
4. In special openings with a diameter of 6,5 mm in a flange of a nave three ravnovysoky pins 5 (see fig. of Vypressovk of a nave) to dia are established. 6,3 mm and about 70 mm long.
5. For an exception of a distortion and jamming the effort of a vypressovka is distributed evenly between pins at the expense of a floating heel 4.
6. Before a vypressovka of an external ring from a rotary fist it is necessary to remove a lock ring.
7. It is allowed to make a vypressovka of the bearing, leaning on an internal ring as the vypressovanny bearing is unsuitable for further operation.


6.1.6.2. Rotary fist

6.1.6.4. Stabilizer and levers