Corner of disorder of forward wheels. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
6.1. Forward suspension bracket
6.1.1. Features of a design of a forward suspension bracket
6.1.2. Check and adjustment of parameters of the unit of forward wheels
6.1.3. Corner of a longitudinal inclination of an axis of turn
6.1.4. Corner of disorder of forward wheels
6.1.5. Convergence of forward wheels
6.1.6. Removal of knots of a forward suspension bracket
6.1.7. Installation of details and knots of a forward suspension bracket on the car
6.1.8. Dismantling of a telescopic rack
6.1.9. Damping racks of a forward suspension bracket
6.1.10. Possible malfunctions of a forward suspension bracket
6.2. Back suspension bracket
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

6-1-4-ugol-razvala-perednikh-koles.html

6.1.4. Corner of disorder of forward wheels

Adjustment of disorder of forward wheels and fixing of the hinge of a rack

1 – stabilizer nut;

2 – bolt of fastening of the hinge;

3 – cover flange;

4 – adjusting bolt;

5 – stabilizer hinge;

6 – back cup;

7 – nut

Defines the provision of the average plane of rotation of a driving wheel which on the car at full loading has negative value (i.e. the top half of a wheel of an inclination to the middle of the car).

At discrepancy of a corner of disorder to these tab. Parameters of the unit of forward wheels carry out adjustment due to movement of the adjusting ram 51 (see rice. Forward suspension bracket of the car) on a carving core of the lower bolt of the 30th fastening of a telescopic rack to a lug of a rotary fist.

PERFORMANCE ORDER
1. In the beginning the self-stopped nuts on bolts (approximately on one turn), and then the lower bolt 4 turn away (see rice. Adjustment of disorder of forward wheels and fixing of the hinge of a rack), established by a six-sided head back on the car course, is regulated a disorder corner.
2. When turning this bolt clockwise the corner of disorder increases by one turn approximately on 0 °5', at rotation to the opposite side – decreases.
3. If it becomes clear that there is not enough adjustment, then its range can be expanded due to eccentricity of the ram 51 (see rice. A forward suspension bracket of the car) after its extraction and a turning in a lug of a rotary fist.


6.1.3. Corner of a longitudinal inclination of an axis of turn

6.1.5. Convergence of forward wheels