|
REASON
|
ELIMINATION METHOD
|
|
Noise and knock at the movement
|
|
Fastening of brackets or hinges of a bar of the stabilizer weakened, a rotary fist of a forward suspension bracket, the lever of a steering trapeze, saylent-blocks of levers of a suspension bracket, support are resistant
|
To tighten the weakened threaded connections
|
|
Wear of a rubber element of a support of a telescopic rack or deformation of flanges of its fittings
|
To replace worn-out details or to correct flanges
|
|
Wear of bearings of forward wheels or weakening of fastening of a nut of a nave
|
To replace the bearing, to tighten a nut
|
|
Wear of spherical hinges of a forward suspension bracket and steering mechanism
|
To replace worn-out hinges
|
|
Draft or breakage of a spring of a forward suspension bracket
|
To replace a spring
|
|
Destruction of buffers of compression or release
|
To replace buffers
|
|
The increased imbalance of forward wheels
|
To balance wheels or to trade their places
|
|
Withdrawal of the car from rectilinear movement along the horizontal road *
|
|
Unequal pressure of air in tires
|
To establish normal pressure
|
|
Violation of corners of a longitudinal inclination of an axis of turn, big difference on the parties
|
To adjust turn axis tilt angles, to provide a difference of corners of the left and right parties no more than 0 °30'
|
|
Violation of corners of disorder of forward wheels, big difference on the parties
|
To restore corners of disorder of forward wheels, to provide a difference of corners of disorder of the left and right parties no more than 0 °30'
|
|
Destruction and draft of one of support of a telescopic rack
|
To replace a support
|
|
Unequal draft of springs of a forward suspension bracket
|
To replace the settled spring
|
|
Considerable difference in wear of tires
|
To replace the worn-out tire
|
|
Unequal rigidity of a board of the tire
|
To change the direction of rotation of the tire or to rearrange the tire on other party
|
|
The raised imbalance of forward wheels
|
To balance wheels
|
|
The increased or uneven wear of a protector of tires
|
|
The convergence and the angles of installation of forward wheels are broken
|
To adjust the angles of installation of wheels
|
|
The increased speed when performing turn
|
Not to bring to a wheel skid at turn
|
|
Too sharp dispersal of the car with pro-slipping of driving wheels
|
To avoid dispersal of the car with pro-slipping of wheels
|
|
Frequent use of brakes with blocking of wheels
|
Not to bring to a skid of wheels when braking
|
|
Car overload
|
Not to allow a car overload
|
|
The raised imbalance of wheels
|
To balance wheels
|
|
The increased wear of hinges and rubber-metal hinges of a suspension bracket and the steering drive
|
To repair a suspension bracket with replacement of worn-out details
|
|
Longerons or arms of fastening of the stabilizer of levers of a forward suspension bracket are bent. The beam or levers of a back suspension bracket are bent
|
To correct the damaged details or to replace them new
|
|
The damping rack does not work
|
To replace a damping rack
|
