Spherical hinge. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
6.1. Forward suspension bracket
6.1.1. Features of a design of a forward suspension bracket
6.1.2. Check and adjustment of parameters of the unit of forward wheels
6.1.3. Corner of a longitudinal inclination of an axis of turn
6.1.4. Corner of disorder of forward wheels
6.1.5. Convergence of forward wheels
6.1.6. Removal of knots of a forward suspension bracket
6.1.6.1. Telescopic rack
6.1.6.2. Rotary fist
6.1.6.3. Wheel nave
6.1.6.4. Stabilizer and levers
6.1.6.5. Spring of a forward suspension bracket
6.1.6.6. Support of a telescopic rack
6.1.6.7. Lever of a forward suspension bracket
6.1.6.8. Spherical hinge
6.1.6.9. Fist of a telescopic rack
6.1.7. Installation of details and knots of a forward suspension bracket on the car
6.1.8. Dismantling of a telescopic rack
6.1.9. Damping racks of a forward suspension bracket
6.1.10. Possible malfunctions of a forward suspension bracket
6.2. Back suspension bracket
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

6-1-6-8-sharovojj-sharnir.html

6.1.6.8. Spherical hinge

PERFORMANCE ORDER
1. Before a reversing of bolts 2 (see rice. Adjustment of disorder of forward wheels and fixing of the hinge of a rack) fastenings of the spherical hinge to a rotary fist it is necessary to unbend accurately the flange 3 covers used for latching of bolts.
2. To remove a cover and to check its safety. Mechanical damages to a type of through cracks or peeling of rubber from fittings are inadmissible. Replacement of the damaged cover new is required.
3. To check wear of working surfaces of the hinge, having turned his finger manually. Free movement of a finger (with a gap) or its jamming are inadmissible.
4. The condition of spherical hinges on suspension bracket levers at the hung-out forward wheels is checked.
5. If at radial or axial loading of a finger of the hinge by effort of 980 N (100 kgfs) the gap between a board of the brake mechanism and a lug of the lever of a suspension bracket changes in both parties more than on 0,5 mm, then it is necessary to replace the spherical hinge new.


6.1.6.7. Lever of a forward suspension bracket

6.1.6.9. Fist of a telescopic rack