Spring of a forward suspension bracket. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
6.1. Forward suspension bracket
6.1.1. Features of a design of a forward suspension bracket
6.1.2. Check and adjustment of parameters of the unit of forward wheels
6.1.3. Corner of a longitudinal inclination of an axis of turn
6.1.4. Corner of disorder of forward wheels
6.1.5. Convergence of forward wheels
6.1.6. Removal of knots of a forward suspension bracket
6.1.6.1. Telescopic rack
6.1.6.2. Rotary fist
6.1.6.3. Wheel nave
6.1.6.4. Stabilizer and levers
6.1.6.5. Spring of a forward suspension bracket
6.1.6.6. Support of a telescopic rack
6.1.6.7. Lever of a forward suspension bracket
6.1.6.8. Spherical hinge
6.1.6.9. Fist of a telescopic rack
6.1.7. Installation of details and knots of a forward suspension bracket on the car
6.1.8. Dismantling of a telescopic rack
6.1.9. Damping racks of a forward suspension bracket
6.1.10. Possible malfunctions of a forward suspension bracket
6.2. Back suspension bracket
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

6-1-6-5-pruzhina-perednejj-podveski.html

6.1.6.5. Spring of a forward suspension bracket

Installation of a spring of a forward suspension bracket when calibrating

1 – basic washer;

2 – spring

The springs intended for installation in a suspension bracket have to be one dimensional group.

Belonging of springs to specific group on loading decides with a constant control height of 216 mm on application of special basic washers 1.

To the first group the springs marked with one risky on a trailer round, having load of equal 3333–3433 N (340–350 kgfs), concern to the second group – with two risks, 3433–3512 N (350–358 kgfs) having loading.

If after operation of a spring of the second group have the underestimated loading to 3335 N (340 kgfs), then they can be used as springs of the first group.

PERFORMANCE ORDER
To clear a spring of dirt and to check carefully. In the presence of cracks or deformation of rounds to replace a spring new.


6.1.6.4. Stabilizer and levers

6.1.6.6. Support of a telescopic rack