| 1. To remove an upholstery from a door. |
| 2. Via the assembly hatch in the internal panel of a door to reach by the screw-driver to the switch 5 and to serially draw in each of four petals of the holder of the 6th switch so that they entered a figured opening of the panel. |
| 3. To take out the switch from an opening in the external panel of a door. |
| 4. In case of need replacements of a returnable spring of the case of the switch the following operations are in addition performed. |
| 5. To beat out a pin 1 (see rice. The switch of locks of forward doors), the fixing lead 2 to the switch cylinder 5 and to remove a lead. |
| 6. To remove the remains of a returnable spring 3 from the case 4 switches. |
| 7. To install a new returnable spring on the switch case, having provided at the same time calling of two short moustaches of a spring the corresponding grooves of the case and the cylinder and having tracked lack of overlapping of rounds of a spring. |
| 8. To get a lead on the forward end of the cylinder, having paid attention to the correct provision of a lead 2, a miscellaneous for the switch of locks of the left and right doors (see rice. The switch of locks of forward doors, I and II) and to press a pin 1. Correctly pressed pin has to be visible since both ends of an opening in a lead, but at the same time should not act over a lead surface. |
| 9. Having inserted a key into the cylinder, to turn it several times in both parties, at the same time to pay attention to correctness of work of a spring which has to return the cylinder turned by a key on any of possible corners to a starting position. |
