|
10-2-17-snyatie-i-ustanovka-zadnego-borta-platformy-kuzova-tipa-pikap.html
10.2.17. Removal and installation of a back board of a platform of a body like "pickup"Fragments of sections of a body like "pickup" on a cargo platform, the back buffer and a back board
1 – back buffer;
2 – bolt of M8-6g x 16th fastening back
buffers;
3 – washer of the 8th spring fastenings of the back buffer;
4 – washer of the 8th fastening of the back buffer;
5 – platform basis;
6 – cap of the back buffer;
7 – axis of fastening of the limiter back
boards;
8 – washer of fastening of the limiter;
9 – washer wavy fastenings
limiter;
10 – side board of a platform;
11 – limiter of a back board;
|
12 – back board of a platform;
13 – bolt of fastening of a loop of a back board;
14 – plate mobile fastenings of a loop of a back board;
15 – screw of fastening of a loop of a back board;
16 – mobile part of a loop of a back board;
17 – motionless part of a loop of a back board;
18 – axis of a loop of a back board;
19 – rivet 4 x 6 fastenings of a spring of the limiter;
20 – limiter spring right;
21 – limiter spring left;
K1 – a zone of installation of the lock of a back board |
The back board of a platform 12 is hung on the body case by means of loops by a motionless link 16 welded on a board, and mobile 17 – fixed by screws 15 and bolts 13 to the platform 5 basis. The design of fastening of loops on a body by means of a mobile plate 14 allows to make, in case of need, adjustment of provision of a back board in a body aperture.
Removal
| PERFORMANCE ORDER |
| 1. Having substituted a suitable support at the level of a platform floor to open a back board. |
| 2. Having established a back board in situation (about 40-50 ° from a vertical) at which the groove in the top link of the limiter 11 coincides with a shaped shaft of an axis of fastening of the limiter 7 to remove the limiter from the axis located at an end face of a side board of the 10th platform. |
| 3. Having turned the lower link of the limiter 11 as it is described above to remove the limiter from the axis located on a back board. |
| 4. To make the above described operations for the second limiter and to lower a back board on a support. |
| 5. To turn out screws 15 and bolts of the 13th fastening of loops and to remove a back board together with loops. |
| 6. Installation of a back board is made in the return sequence. |
| 7. At the same time, without tightening screws and bolts of fastening of loops to a body it is final, to adjust the provision of a board in an aperture movement of mobile plates of fastening of loops, having provided uniform gaps on all perimeter of a board. Final moments of an inhaling of screws 15 (8–12 N · l), bolts 13 (12–18 N · м). |
|
|
|
