Removal of an upholstery of side doors. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
10.1. Features of a design of bodies of cars of fashion. 2141-01, 2335 and their modifications
10.2. Body fittings
10.2.1. Removal of an upholstery of side doors
10.2.2. Window regulators
10.2.3. Replacement of lowering glass
10.2.4. Possible malfunctions of side doors
10.2.5. Replacement of glasses
10.2.6. Locks and drives of locks of side doors
10.2.7. Replacement of springs of the external handle of a side door
10.2.8. Replacement of the switch of locks of a forward door
10.2.9. Possible malfunctions of locks and drives of side doors
10.2.10. Lock of a cowl and its drive
10.2.11. The body back door lock like "hatchback" and its drive
10.2.12. Replacement of locks of a back board of a body like "pickup"
10.2.13. Removal, installation and adjustment of side doors
10.2.14. Removal of a back door of a body like "hatchback"
10.2.15. Removal, installation and adjustment of a cowl
10.2.16. Removal and installation of a door of a back of a body like "hatchback"
10.2.17. Removal and installation of a back board of a platform of a body like "pickup"
10.2.18. Facing of a radiator
10.2.19. Removal and installation of the forward buffer
10.2.20. Removal and installation of the back buffer of a body like "hatchback"
10.2.21. Removal and installation of the back buffer of a body like "pickup"
10.2.22. Removal and installation of forward wings
10.3. Dashboard
10.4. Ventilation and heating
11. Electric equipment
12. Electrical circuitries
 

fd148775









10-2-1-snyatie-obivki-bokovykh-dverejj.html

10.2.1. Removal of an upholstery of side doors

Installation of an upholstery of a side door

1 – button of blocking of locks;
2 – upholstery;
3 – draft of the internal drive;
4 – lead of the handle of the internal drive;
5 – screw of the top fastening of a hand-rail;
6 – hand-rail;
7 – handle of the internal drive;
8 – screw of the lower fastening of a hand-rail;
9 – screw of fastening of an upholstery

Upholstery 2 (see rice. Installation of an upholstery of a side door) a forward door fastens to a door eight screws 9, an upholstery of a back door – seven screws.

At the same time each of vertical end faces of an upholstery fastens three screws.

Besides, the upholstery is pressed to the internal panel of a door by the window regulator handle, a hand-rail 6 and the handle 7 of the internal drive subassembled with it.

PERFORMANCE ORDER
1. To remove the handle 5 (see rice. Installation of a window regulator and its handle) of a window regulator, at the same time at first it is necessary to take out a cap 3 from the handle, having carefully hooked it the screw-driver or a pricker from grooves under plastic clamps. After that to turn out the screw 4. After the handle to remove the socket 2 handles and laying of 1 socket.
2. To turn out two screws 5 (see rice. Installation of an upholstery of a side door) located on the horizontal shelf of a hand-rail 6 previously having removed a cap, and one screw 8 (access to this screw is open through a rectangular opening in the handle 7).
3. Having turned out these three screws, to remove from a door the hand-rail subcollected with the handle of the internal drive previously having disconnected draft 3 internal drives of locks of a door from the drive handle, having brought draft out of gearing with a lead 4 handles.
4. To turn out eight screws 9 which the panel of an upholstery of a forward door fastens to the internal panel of a door, and for the panel of an upholstery of a back door respectively seven screws.
5. To carefully take away an upholstery from a door, to pass through an opening in the plug the button of 1 blocking of locks acting over an upholstery, to remove an upholstery from a door.
6. To unstick pieces of an adhesive tape 8 from valves (see rice. Installation of lowering glass of a forward door), by which the valve are attached to the internal panel of a door, to pick up the screw-driver and to bring out of gearing with a door flange each of four holders 2 sealants 3 and to remove a sealant together with valves.
7. The last operation can be not made if access to the interesting knot of fittings is provided with cultivation of valves in the parties.
8. Installation of an upholstery on a door needs to be made upside-down.


10.2. Body fittings

10.2.2. Window regulators