|
4-9-3-3-2-proverka-zazora-mezhdu-vkladyshami-podshipnikov-i-kolenchatym-valom.html
4.9.3.3.2. Check of a gap between inserts of bearings and a bent shaftOn inserts it is impossible to make any subracing operations. At teases, risks or peelings it is necessary to replace inserts.
| PERFORMANCE ORDER |
| 1. To arrange a piece of the calibrated plastic wire on the checked neck. |
| 2. To establish covers with radical inserts and to tighten bolts of fastening of covers. Moment of an inhaling of 115 N · m (11,5 kgfs · м). |
| 3. To uncover also in size of flattening of a wire on a packing scale (see rice. Definition of a gap between a radical neck and an insert) to determine gap size by a packing scale. |
| 4. To place a piece of the calibrated wire on the surface of a conrod neck, to establish a rod cover on a rod and to tighten nuts. Moment of an inhaling of 60 N · m (6 kgfs · м). |
| 5. To uncover also on the scale put on packing on flattening of a wire (see rice. Measurement of a gap between a conrod neck and an insert) to determine gap size by the calibrated wire. |
| 6. If the gap exceeds the most admissible (0,15 mm), to replace inserts repair after grinding of necks. |
| 7. To unhook cables from loops. |
| 8. To lift the car. |
| 9. Coupling guard. |
| 10. The lower bolts of fastening of a case of coupling to the block of cylinders. |
|
Sign of the correct assembly and interface of necks to inserts is free rotation of a bent shaft.
The bent shaft is dynamically balanced without flywheel. The unbalanced moment should not exceed 0,08 kgfs · m.
|
|
