Conrod and piston group. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
4.9.1. Features of dismantling of engines
4.9.2. Features of assembly of engines
4.9.3. Technical condition of knots and systems of engines of fashion. 331, 3317, 3313
4.9.3.1. Block of cylinders and sleeve of cylinders
4.9.3.2. Conrod and piston group
4.9.3.2.1. Selection of the piston to a sleeve of cylinders
4.9.3.2.2. Check of a condition of piston rings
4.9.3.3. Bent shaft and flywheel
4.9.3.4. Oil pump
4.9.3.5. Head of the block of cylinders and valvate mechanism
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 

fd148775









4-9-3-2-shatunno-porshnevaya-gruppa.html

4.9.3.2. Conrod and piston group

Piston rings are removed and established by means of adaptation (see rice. Device for removal and installation of piston rings)

From the piston and the plug of a small head of a rod to press off a piston finger blow of the hammer through a brass mandrel. It is previously necessary to heat the piston for what to lower it for 2–3 min. in the water having temperature of 45-75 °C.


4.9.3.1. Block of cylinders and sleeve of cylinders
4.9.3.2.1. Selection of the piston to a sleeve of cylinders