Flywheel. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
4.9.1. Features of dismantling of engines
4.9.2. Features of assembly of engines
4.9.3. Technical condition of knots and systems of engines of fashion. 331, 3317, 3313
4.9.3.1. Block of cylinders and sleeve of cylinders
4.9.3.2. Conrod and piston group
4.9.3.3. Bent shaft and flywheel
4.9.3.3.1. Radical and conrod necks
4.9.3.3.2. Check of a gap between inserts of bearings and a bent shaft
4.9.3.3.3. Flywheel
4.9.3.4. Oil pump
4.9.3.5. Head of the block of cylinders and valvate mechanism
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

4-9-3-3-3-makhovik.html

4.9.3.3.3. Flywheel

Check of technical condition of a flywheel of engines mod.331, 3317 and 3313, its control and repair it is necessary to make the same as at the engine of fashion. 2106.

Difference only that at installation of a flywheel on a mandrel with centering on a landing opening a beating of surfaces 2 on radius And (see rice. A flywheel) and 3 on radius In 0,3 mm should not exceed.

The flywheel assembled with a gear wreath is balanced statically. The moment of an imbalance should not exceed 0,5 N · m (0,05 kgfs · м).

Moment of an inhaling of bolts of fastening of a flywheel of 70-80 N · m (7–8 kgfs · м).

Difference of a flywheel of the engine of model 3313 are two pins pressed in its cylindrical surface, the being signaling devices for MPSZ sensors. It is necessary to be convinced of durability of their landing in openings and when easing – to restore.



4.9.3.3.2. Check of a gap between inserts of bearings and a bent shaft

4.9.3.4. Oil pump