9.7.4. Check of a condition of working surfaces of a brake disk
It is necessary to check a beating of working surfaces of a brake disk in relation to the plane of its rotation, without removing a disk from the car. If the beating is more than 0,12 mm, it is necessary to pereshlifovat a disk, but taking into account that the final thickness of a disk was not less than 11 mm.
| PERFORMANCE ORDER
| 1. At detection of damages or especially deep рисок, and also the wear exceeding 0,8 mm on each party it is necessary to replace a disk with new.
| 2. For this purpose it is necessary to remove a disk from a nave, previously having removed a bracket of a forward brake and having turned off two clamps 18 (see rice. Brake mechanisms of lobbies