Reduction of the signaling device in the working condition. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
9.1. Specifications and characteristics
9.2. General assessment of technological level of a condition of brake management
9.3. Main cylinder of a brake
9.4. Removal and dismantling of the main cylinder of a brake
9.5. Assembly of the main cylinder of a brake
9.6. Vacuum amplifier
9.7. Brake mechanisms of forward wheels
9.8. Brake mechanisms of back wheels
9.9. Adjustment of the mechanism of the manual drive of the parking brake system
9.10. Pressure regulator
9.11. Signaling device
9.12. Removal of air from a hydraulic actuator of brakes (pumping of brakes)
9.13. Reduction of the signaling device in the working condition
9.14. Possible malfunctions of brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

9-13-privedenie-signalnogo-ustrojjstva-v-rabochee-sostoyanie.html

9.13. Reduction of the signaling device in the working condition

When pumping a hydraulic actuator in its contours there is a difference of pressure displacing the piston of the signaling device therefore the control lamp is lit.

PERFORMANCE ORDER
1. For reduction of the piston of the signaling device in a starting position it is necessary to unscrew the valve of production of air of the big cylinder of a bracket of the right or left forward brake on 1/2 turns, previously having removed from it a protective cap, and, smoothly pressing a brake pedal, it is necessary to achieve that the control lamp on the dashboard went out.
2. Then, holding a pedal in the pressed situation, to wrap the valve.

Prevention

The specified operation should be Performed at completely released handle of the mechanism of the manual drive parking brake
systems.


3. If the lamp blinked, but did not go out, it is necessary to repeat everything at first, but having already opened at the same time the valve of production of air on small cylinders.
4. Having extinguished a lamp, it is necessary to restore the required liquid level in a tank.


9.12. Removal of air from a hydraulic actuator of brakes (pumping of brakes)

9.14. Possible malfunctions of brake management