Brake shoes of a forward brake. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
9.1. Specifications and characteristics
9.2. General assessment of technological level of a condition of brake management
9.3. Main cylinder of a brake
9.4. Removal and dismantling of the main cylinder of a brake
9.5. Assembly of the main cylinder of a brake
9.6. Vacuum amplifier
9.7. Brake mechanisms of forward wheels
9.7.1. Removal and dismantling of a bracket of a forward brake
9.7.2. Assembly and installation of a bracket
9.7.3. Brake shoes of a forward brake
9.7.4. Check of a condition of working surfaces of a brake disk
9.8. Brake mechanisms of back wheels
9.9. Adjustment of the mechanism of the manual drive of the parking brake system
9.10. Pressure regulator
9.11. Signaling device
9.12. Removal of air from a hydraulic actuator of brakes (pumping of brakes)
9.13. Reduction of the signaling device in the working condition
9.14. Possible malfunctions of brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 

fd148775









9-7-3-tormoznye-kolodki-perednego-tormoza.html

9.7.3. Brake shoes of a forward brake

Blocks are subject to replacement if thickness of their slips decreased to 3 mm.

Replacement

PERFORMANCE ORDER
1. To take out a clamp 10 (see rice. Brake mechanisms of forward wheels) and to remove fingers 14.
2. To drown pistons in the case of cylinders. For an utaplivaniye of pistons in the case it is possible to use the screw-driver as the lever, being careful at the same time not to damage antisplash covers on pistons.
3. To take out an internal brake shoe 3.
4. To shift a frame of 1 by 5-6 mm on itself and, having moved an external block towards a brake disk, to remove it.
5. To establish a new external block so that on its ledge in a middle part the frame laid down.
6. To move a frame from itself, having pressed a frictional surface of a block to a brake disk.
7. To establish an internal block.
8. To establish fingers 14, having wrung out a frame 1.
9. On fingers to establish a clamp 10.


9.7.2. Assembly and installation of a bracket

9.7.4. Check of a condition of working surfaces of a brake disk