Check of the case of bearings of the camshaft. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.8.1. Features of dismantling of the engine of fashion. 2106
4.8.2. Features of assembly of the engine of fashion. 2106
4.8.3. Assessment of technical condition of knots and systems of the engine of fashion. 2106
4.8.4. Conrod and piston group
4.8.5. Bent shaft and flywheel
4.8.6. Oil pump of the engine
4.8.7. Head of the block of cylinders and valvate mechanism
4.8.8. Camshaft and its drive
4.8.8.1. Check of the camshaft
4.8.8.2. Check of the case of bearings of the camshaft
4.8.8.3. Adjustment of a tension of a chain
4.8.8.4. Natyazhitel
4.8.8.5. Camshaft drive chain
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

4-8-8-2-proverka-korpusa-podshipnikov-raspredelitelnogo-vala.html

4.8.8.2. Check of the case of bearings of the camshaft

To wash out and clear the case of bearings of the camshaft and channels for an oil supply.

To check diameter of openings in support. If the gap between necks of the camshaft and support exceeds 0,2 mm (extreme wear), to replace the case of bearings.

Internal basic surfaces have to be smooth, without zadir; if there are damages, to replace the case of bearings.

To check whether there are no cracks on the case. If there are cracks, then to replace the case of bearings of the camshaft.

Adjustment of gaps between levers and cams of the camshaft is described in subsection 2.1.4 earlier.



4.8.8.1. Check of the camshaft

4.8.8.3. Adjustment of a tension of a chain