Oil pump of the engine. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.8.1. Features of dismantling of the engine of fashion. 2106
4.8.2. Features of assembly of the engine of fashion. 2106
4.8.3. Assessment of technical condition of knots and systems of the engine of fashion. 2106
4.8.4. Conrod and piston group
4.8.5. Bent shaft and flywheel
4.8.6. Oil pump of the engine
4.8.6.1. Removal and installation of the oil pump
4.8.6.2. Dismantling and assembly of the oil pump
4.8.6.3. Check of details of the pump
4.8.6.4. Check of the reducing valve
4.8.6.5. Roller and gear wheel of the drive of the oil pump
4.8.6.6. Plugs of the roller of the drive of the oil pump
4.8.6.7. Plug of a gear wheel of the drive of the oil pump
4.8.7. Head of the block of cylinders and valvate mechanism
4.8.8. Camshaft and its drive
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 

fd148775









4-8-6-maslyanyjj-nasos-dvigatelya.html

4.8.6. Oil pump of the engine

Removal

PERFORMANCE ORDER
1. To install the car on a viewing ditch or the elevator, to disconnect wires from the rechargeable battery.
2. To merge oil from an engine case.
3. To turn off nuts, the fixing adapters with pillows of a forward engine mount to a cross-piece and to slightly raise the engine a jack or a waist that between a cross-piece and a case the sufficient gap was formed.
4. To turn off bolts of fastening of an oil case and to remove it together with laying.
5. To turn off two bolts of fastening of the oil pump and a nut of fastening of an oil receiver to an arm and to remove the oil pump together with an oil receiver and laying of the case of the oil pump.
6. To turn off nuts of fastening of an oil receiver to the case of the oil pump and to disconnect an oil receiver.
7. To remove laying of a flange of an oil receiver from hairpins.

To carry out operations on installation of the oil pump and an oil receiver on the engine upside-down.



4.8.5.9. Check of an axial gap of a bent shaft

4.8.6.1. Removal and installation of the oil pump