Check of the camshaft. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.8.1. Features of dismantling of the engine of fashion. 2106
4.8.2. Features of assembly of the engine of fashion. 2106
4.8.3. Assessment of technical condition of knots and systems of the engine of fashion. 2106
4.8.4. Conrod and piston group
4.8.5. Bent shaft and flywheel
4.8.6. Oil pump of the engine
4.8.7. Head of the block of cylinders and valvate mechanism
4.8.8. Camshaft and its drive
4.8.8.1. Check of the camshaft
4.8.8.2. Check of the case of bearings of the camshaft
4.8.8.3. Adjustment of a tension of a chain
4.8.8.4. Natyazhitel
4.8.8.5. Camshaft drive chain
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

4-8-8-1-proverka-raspredelitelnogo-vala.html

4.8.8.1. Check of the camshaft

The surfaces of basic necks of the camshaft and surface of cams have to be well polished and should not have damages. If имесютя jamming traces, deep risks or steps from wear, a shaft it is necessary to replace.

To install the camshaft by extreme necks on two prisms placed on a test plate and to measure the indicator a radial beating of average necks which 0,02 mm should not exceed.

The camshaft refrains from axial movements by the persistent flange placed in ring bore of the forward end and attached by bolts to an end face of the case of bearings. The gap between a persistent flange and shaft determined by distinction of thickness of a flange and width of ring bore provides free rotation of a shaft.



4.8.8. Camshaft and its drive

4.8.8.2. Check of the case of bearings of the camshaft