Details of fastening of the shock-absorber and buffer of the course of compression of a back suspension bracket. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
6.1. Forward suspension bracket
6.2. Back suspension bracket
6.2.1. Features of a design of a back suspension bracket of cars of fashion. 2141-01, 21412-01 and their modifications
6.2.2. Check of technical condition of a back suspension bracket on the car
6.2.3. Check of technical condition of a back suspension bracket (in the removed state)
6.2.3.1. Beam of a back suspension bracket
6.2.3.2. Cross bar
6.2.3.3. Springs of a back suspension bracket
6.2.3.4. Details of fastening of the shock-absorber and buffer of the course of compression of a back suspension bracket
6.2.4. Features of dismantling, assembly and installation of a back suspension bracket
6.2.5. Features of a design of a back suspension bracket of cars of type <пикап>
6.2.6. Technical characteristic of a back suspension bracket
6.2.7. Check of technical condition of a back suspension bracket
6.2.8. Possible malfunctions of a back suspension bracket
6.2.9. Possible malfunctions of racks and shock-absorbers of a back suspension bracket
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

6-2-3-4-detali-krepleniya-amortizatora-i-bufer-khoda-szhatiya-zadnejj-podveski.html

6.2.3.4. Details of fastening of the shock-absorber and buffer of the course of compression of a back suspension bracket

To check a condition of rubber plugs of eyes of shock-absorbers. They should be replaced in the presence of cracks, gaps and if they do not provide turning on a corner ±18 ° without slipping of rubber of rather internal and external plugs.

PERFORMANCE ORDER
For check it is necessary to install the shock-absorber vertically in a vice, having clamped the expansion plug of the lower hinge on end faces and to reject the shock-absorber at the specified size. If after that the shock-absorber accepts vertical position again, then in the absence of cracks and anguishes of rubber of the plug can be used for further operation.

The rubber pillows of fastening of a rod to a body and the buffer of the course of compression of a suspension bracket established on a shock-absorber rod demand replacement if they are damaged or destroyed.



6.2.3.3. Springs of a back suspension bracket

6.2.4. Features of dismantling, assembly and installation of a back suspension bracket