Dismantling and assembly of the internal hinge. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
5.1. Coupling
5.2. Transmission
5.2.1. Features of a design and service
5.2.2. Features of removal and installation of the transmission
5.2.3. Features of repair of the transmission
5.2.4. Possible malfunctions of the transmission
5.2.5. Main transfer
5.2.6. Drive of forward wheels
5.2.6.1. Design of the drive of forward wheels and care of it
5.2.6.2. Removal and installation of the drive of a forward wheel
5.2.6.3. Dismantling and assembly of hinges of the drive of a forward wheel
5.2.6.3.1. Removal, dismantling and assembly of the external hinge
5.2.6.3.2. Dismantling and assembly of the internal hinge
5.2.6.4. Possible malfunctions of the drive of forward wheels
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

5-2-6-3-2-razborka-i-sborka-vnutrennego-sharnira.html

5.2.6.3.2. Dismantling and assembly of the internal hinge

To make dismantling of the hinge only in case of damage of a protective cover.

Removal

PERFORMANCE ORDER
1. To release a cover 7 (see rice. The drive of a forward wheel) from two collars 5 and 8, having pulled together it from a neck of a chekhloderzhatel, to advance on a shaft.
2. To remove from a shaft a locking ring 10 and, tapping on a hinge end face, to bring down him from the shlitsevy end of a shaft.
3. To remove a persistent ring 14.
4. If necessary to remove a cover for replacement.
5. To wash out the hinge and to press from the hinge case a chekhloderzhatel 11.
6. To remove a holder with a separator in extreme situation and, tapping with the mandrel made of soft metal on an end face of the separator inclined to situation when the ball goes beyond a hinge case end face to squeeze out the screw-driver a ball from a separator nest.
7. To similarly take other balls.
8. Having developed a holder in the plane, perpendicular to a separator end face, to roll out a holder.
9. To wash out details and to check their state, paying special attention to a condition of paths and a separator. Existence of cracks, chips and traces of corrosion is inadmissible.
10. At wear of a working surface of racetracks more than or existence of the defects stated above to replace the hinge with 0,1 mm assembled.

Assembly

PERFORMANCE ORDER
1. Assembly of the internal hinge is made as it should be, the return to dismantling, taking into account the following.
2. To check a condition of persistent and locking rings and if necessary to replace them new.
3. Before assembly to grease hinge details with SHRUS-4 lubricant.
4. At installation of a separator assembled with a holder to provide coincidence of the tags put before dismantling, at the same time flutes of a holder and the case have to cross.
5. To put in a cavity of a napressovanny chekhloderzhatel and on a surface of paths SHRUS-4 lubricant in number of 100 g.
6. Correctly assembled hinge provides axial movement of its holder without notable resistance not less than 26 mm.


5.2.6.3.1. Removal, dismantling and assembly of the external hinge

5.2.6.4. Possible malfunctions of the drive of forward wheels