Dismantling and assembly of the oil pump. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.8.1. Features of dismantling of the engine of fashion. 2106
4.8.2. Features of assembly of the engine of fashion. 2106
4.8.3. Assessment of technical condition of knots and systems of the engine of fashion. 2106
4.8.4. Conrod and piston group
4.8.5. Bent shaft and flywheel
4.8.6. Oil pump of the engine
4.8.6.1. Removal and installation of the oil pump
4.8.6.2. Dismantling and assembly of the oil pump
4.8.6.3. Check of details of the pump
4.8.6.4. Check of the reducing valve
4.8.6.5. Roller and gear wheel of the drive of the oil pump
4.8.6.6. Plugs of the roller of the drive of the oil pump
4.8.6.7. Plug of a gear wheel of the drive of the oil pump
4.8.7. Head of the block of cylinders and valvate mechanism
4.8.8. Camshaft and its drive
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 

fd148775









4-8-6-2-razborka-i-sborka-maslyanogo-nasosa.html

4.8.6.2. Dismantling and assembly of the oil pump


Oil pump and oil receiver of the engine of fashion. 2106


1 – bolt of fastening of a cover of the pump;
2 – washer;
3 – pump cover;
4 – laying of a cover of the pump;
5 – the roller with the leading gear wheel;
6 – the conducted gear wheel;
7 – an axis of the conducted gear wheel;
8 – pump housing;
9 – valve saddle;
10 – reducing valve;
11 – spring of the reducing valve;
12 – laying of a stopper;
13 – stopper;
14 – hairpin of fastening of an oil receiver;
15 – laying of a flange of an oil receiver;
16 – oil receiver;
17 – spring washer;
18 – nut of fastening of an oil receiver;
19 – top arm of fastening of an oil receiver;
20 – conic washer;
21 – nut

PERFORMANCE ORDER
1. To fix the oil pump in a vice.
2. To turn off three bolts 1 and to uncover 3 with laying 4.
3. To take out from the case 8 the pump roller with the leading gear wheel 5 and the conducted gear wheel 6.
4. To turn out a stopper of the 13th reducing valve and to take out from the case a spring 11 and the valve 10.
5. Assembly of the pump is made upside-down.
6. After assembly of the pump at a provorachivaniye of the leading roller a hand of a gear wheel have to rotate smoothly, without jamming.


4.8.6.1. Removal and installation of the oil pump

4.8.6.3. Check of details of the pump