Plug of a gear wheel of the drive of the oil pump. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
4.1. Thermostat
4.2. Thermal mode of the engine
4.3. Installation of ignition on the engine of fashion. 2106
4.4. Installation of ignition on engines of fashion. 331 and 3317
4.5. Installation of the drive of the distributor of ignition on engines of fashion. 331 and 3317
4.6. Replacement of spark plugs
4.7. Possible malfunctions of engines, their reasons and methods of elimination
4.8. Features of repair of the engine of fashion. 2106
4.8.1. Features of dismantling of the engine of fashion. 2106
4.8.2. Features of assembly of the engine of fashion. 2106
4.8.3. Assessment of technical condition of knots and systems of the engine of fashion. 2106
4.8.4. Conrod and piston group
4.8.5. Bent shaft and flywheel
4.8.6. Oil pump of the engine
4.8.6.1. Removal and installation of the oil pump
4.8.6.2. Dismantling and assembly of the oil pump
4.8.6.3. Check of details of the pump
4.8.6.4. Check of the reducing valve
4.8.6.5. Roller and gear wheel of the drive of the oil pump
4.8.6.6. Plugs of the roller of the drive of the oil pump
4.8.6.7. Plug of a gear wheel of the drive of the oil pump
4.8.7. Head of the block of cylinders and valvate mechanism
4.8.8. Camshaft and its drive
4.9. Features of repair of the engine of fashion. 331, 3317 and 3313
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

4-8-6-7-vtulka-shesterni-privoda-maslyanogo-nasosa.html

4.8.6.7. Plug of a gear wheel of the drive of the oil pump

Vypressovka of the plug of a gear wheel of the drive of the oil pump and distributor of ignition

1 – mandrel

It is necessary to check a plug press fitting. Its internal surface has to be smooth and without zadir, otherwise the plug should be replaced.

For a vypressovka and a press fitting of the plug it is necessary to use a mandrel.

After a press fitting to develop an opening of the plug to 16,016–16,037 mm.



4.8.6.6. Plugs of the roller of the drive of the oil pump

4.8.7. Head of the block of cylinders and valvate mechanism