Dismantling of a starter. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
11. Electric equipment
11.1. Wires and safety locks
11.2. Block of safety locks and relay
11.3. Scheme of internal connections of the block of safety locks and relay
11.4. Rechargeable battery
11.5. Electric equipment installed on cars of fashion. 2141-01, 2335
11.6. Electric equipment (21412-01, 214122, 214123 and 23352, 233522, 233523)
11.6.1. Generator 581.3701
11.6.2. Starter 4216.3708
11.6.2.1. Technical characteristic of a starter
11.6.2.2. Check and adjustment of the drive of a starter
11.6.2.3. Dismantling of a starter
11.6.2.4. Check and repair of a starter
11.6.2.5. Assembly and installation of a starter
11.6.3. System of ignition of the engine of fashion. 331i 3317
11.6.4. System of ignition of the engine of fashion. 3313
11.7. Electric equipment (2141-01, 21412-01, 214122, 214123 e 2335, 23352, 233522, 233523)
11.8. Control devices
12. Electrical circuitries
 










fd148775

11-6-2-3-razborka-startera.html

11.6.2.3. Dismantling of a starter

PERFORMANCE ORDER
1. To turn off the lower contact bolt and to disconnect a conclusion 10 (see rice. Starter 4216.3708.) excitement windings.
2. To unscrew screws of fastening of the relay to a cover from the drive and to remove the relay.
3. To turn off nuts on coupling hairpins.
4. To unscrew two screws and to take off a cap 5.
5. To remove lock 3 and adjusting washers from a shaft 4 anchors.
6. To uncover 1 from a collector, to a traverse 7, the case 32 and a cover 20 from the drive.
7. To take out an anchor together with the drive.
8. To shift easy blow to an end face a cylindrical persistent washer 24 towards the drive, then by means of the screw-driver to move apart a spring castle ring and to take out it from bore of a shaft of an anchor.
9. To remove a spring ring, a persistent washer from a shaft of an anchor and the drive.

After dismantling carefully to clear starter details, to wash out gasoline or kerosene and to wipe with a pure rag.
Prevention

In order to avoid washing away of lubricant from porous bronze-and-graphite bearings of covers of a starter and from the drive do not wash these details in gasoline or kerosene.




11.6.2.2. Check and adjustment of the drive of a starter

11.6.2.4. Check and repair of a starter