|
REASON
|
ELIMINATION METHOD
|
|
Lubricant leak through a half shaft flange epiploon
|
|
Wear, hardening of a working edge of an epiploon
|
To replace an epiploon
|
|
Wear of a nave of a flange of a half shaft
|
To replace a half shaft flange
|
|
The constant increased noise level of the main transfer to time of the movement of the car
|
|
Wrong adjustment of gear wheels of the main transfer
|
To adjust the provision of a gear wheel and wheel
|
|
Injury (teases) or wear of teeths of gear wheels of the main transfer
|
To wash out a case of the main transfer, to replace a gear wheel of the main transfer and to fill with fresh oil
|
|
Wear, destruction or wrong adjustment of bearings of differential
|
To replace bearings at their unsatisfactory state, to adjust a tightness of bearings and a side gap of gear wheels of the main transfer
|
|
The increased noise level at dispersal of the car
|
|
The wrong gearing of gear wheels of the main transfer or bearings of a gear wheel (the conducted shaft)
|
To adjust the provision of gear wheels of the main transfer
|
|
Wear or destruction of bearings of a gear wheel
|
To replace bearings at their unsatisfactory state
|
|
Knock of the main transfer at sharp change
mode of the movement of the car
|
|
The increased wear of basic surfaces of a box and gear wheels of differential, the raised gaps in gearing of gear wheels
|
To eliminate the raised gaps in gearing of gear wheels of differential by replacement of gear wheels and a box of differential
|
|
Noise at the movement on turn
|
|
Hard rotation of satellites on an axis
|
To examine working surfaces in the place of landing of satellites to an axis. Insignificant teases of surfaces to smooth out a thin grinding skin; to replace if it is necessary, the damaged details
|
