|
REASON
|
ELIMINATION METHOD
|
|
At the movement of the car of the shooter of the voltmeter of a combination of devices goes beyond a white zone of a scale
|
|
Break in an excitement winding power-supply circuit
|
To restore connection
|
|
The generator tension regulator is damaged
|
To replace the regulator
|
|
Wear or lag of brushes of the generator; oxidation of contact rings
|
To replace the brush holder with brushes; to wipe a ring with the rag moistened in gasoline
|
|
Break or short circuit on "mass" of a winding of excitement of a rotor of the generator
|
To replace a rotor
|
|
Short circuit of one or several positive gates of the vypryamitelny block of the generator
|
To replace the vypryamitelny block of the generator
|
|
Break or mezhvitkovy short circuit in a stator winding
|
To replace the stator
|
|
The generator works, the rechargeable battery is poorly charged
|
|
Weak tension of a belt: slipping with a high frequency of rotation and during the operation of the generator under loading |
To adjust a belt tension
|
|
Fastening of tips of wires on the generator and the rechargeable battery is weakened, conclusions of the rechargeable battery are oxidized, wires are damaged
|
To clear battery conclusions of oxides, to tighten clips, to replace the damaged wires
|
|
The rechargeable battery is faulty
|
To replace the battery
|
|
Tension regulator is damaged
|
To replace tension regulator
|
|
Short circuit between the screw of fastening of the brush holder and the tire of the brush attached to a conclusion In the regulator
|
To eliminate short circuit or to replace the plastic basis of the brush holder
|
|
The rechargeable battery is recharged
|
|
Tension regulator is faulty
|
To replace tension regulator
|
|
The rechargeable battery is faulty
|
To replace the battery
|
|
Short circuit between the screw of fastening of the brush holder and the tire of the brush attached to a conclusion Sh regulators
|
To eliminate short circuit or to replace the plastic basis of the brush holder
|
|
The increased noisiness of the generator
|
|
The generator pulley nut is weakened
|
To tighten a nut
|
|
Generator ball-bearings are damaged
|
To replace ball-bearings
|
|
Mezhvitkovy short circuit of a winding of the stator ("howl" the generator)
|
To replace the stator
|
|
Scratch of brushes
|
To wipe brushes and contact rings with the cotton napkin moistened in gasoline
|
