Dismantling, check of technical condition and assembly of the driveshaft. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
8.1. Features of a design of steering
8.2. Check of technical condition of steering on the car
8.3. Steering adjustment
8.4. Steering assembly
8.5. Spherical hinges of steering drafts
8.6. Technical condition of the driveshaft and a steering column before dismantling
8.7. Dismantling, check of technical condition and assembly of the driveshaft
8.8. Possible malfunctions of steering
9. Brake management
10. Body
11. Electric equipment
12. Electrical circuitries
 










fd148775

8-7-razborka-proverka-tekhnicheskogo-sostoyaniya-i-sborka-kardannogo-vala.html

8.7. Dismantling, check of technical condition and assembly of the driveshaft

Dismantling

PERFORMANCE ORDER
1. To mark a relative positioning of cardan hinges 18 (see rice. Steering), 21 relatively each other.
2. To turn off a nut of a bolt of the 80th fastening of the lower cardan hinge 21, to take out a bolt 80 of a fork and to remove the hinge from a shlitsevy part of the driveshaft 19.
3. To turn off nuts of fastening of the elastic coupling 20 and to disconnect a flange fork of the 57th top cardan hinge from the driveshaft 19.

Check of technical condition

PERFORMANCE ORDER
1. To wash out all metal details in kerosene, and rubber details in warm water and to wipe with a pure rag.
2. To attentively examine cardan hinges, having paid attention to a condition of sealing rings of 56 bearings.
3. To check hinges for existence of gaps in bearings. At detection of damages cardan hinges need to be replaced new.
4. To check a condition of the elastic coupling 20 and expansion plugs 61. Cracks, ruptures of a cord are not allowed.
5. To perform inspection of hairpins of the 60th fastening of the elastic coupling and a restrictive plate. In the presence of wear tracks on cores of hairpins and openings under hairpins in a restrictive plate of a detail it is necessary to replace new.
6. At damage of laying of a flange fork it needs to be replaced new.

Assembly

PERFORMANCE ORDER
1. To install the 57th elastic coupling 20 and a restrictive plate on hairpins of the 60th flange fork.
2. To put on laying and a flange fork the aligning pin of the 58th driveshaft 57 so that hairpins of a flange fork settled down in plugs of the elastic coupling.
3. To wrap nuts of fastening of the elastic coupling; moment of an inhaling of 20-25 N · m (2–2,5 kgfs · м).
4. To establish on shlitsevy the end of the driveshaft the lower cardan hinge 18 it agrees to the tags put before dismantling.
5. In a fork of the lower hinge to establish a bolt 80, to tighten a nut; moment of an inhaling of 20-25 N · m (2–2,5) kgfs · m.


8.6. Technical condition of the driveshaft and a steering column before dismantling

8.8. Possible malfunctions of steering