Removal, dismantling, assembly and installation of the switch of ignition. AZLK 2141 (Muscovite)

Service and car repairs of 2141 - the Muscovite.
	1. General data
	2. Engines
	3. Power supply system
	4. Cooling system
	5. Transmission
	6. Running gear
	7. Tires, wheels
	8. Steering
	9. Brake management
	10. Body
	11. Electric equipment
		11.1. Wires and safety locks
		11.2. Block of safety locks and relay
		11.3. Scheme of internal connections of the block of safety locks and relay
		11.4. Rechargeable battery
		11.5. Electric equipment installed on cars of fashion. 2141-01, 2335
		11.6. Electric equipment (21412-01, 214122, 214123 and 23352, 233522, 233523)
		11.7. Electric equipment (2141-01, 21412-01, 214122, 214123 e 2335, 23352, 233522, 233523)
			11.7.1. Ignition switch
			11.7.2. Removal, dismantling, assembly and installation of the switch of ignition
			11.7.3. Lighting and light alarm system
			11.7.4. Sound signal
			11.7.5. Screen wiper of a wind window
			11.7.6. Heater electric motor
			11.7.7. Engine cooling system fan electric motor
			11.7.8. The electrowarmed back door glass
		11.8. Control devices
	12. Electrical circuitries

11-7-2-snyatie-razborka-sborka-i-ustanovka-vyklyuchatelya-zazhiganiya.html

11.7.2. Removal, dismantling, assembly and installation of the switch of ignition

KZ813 ignition switch details

1 – bracket;

2 – case;

3 – contact part;

4 – facing;

5 – lock;

And – an opening for the fixing pin;

B – the fixing pin

Removal

PERFORMANCE ORDER

1. For removal of the switch of ignition it is necessary to disconnect a wire from the minus plug of the rechargeable battery, to remove a facing casing of a shaft of the steering mechanism and to disconnect a block of wires of the switch of ignition from a plait of wires of the dashboard.

2. To insert a key into the lock of the switch of ignition and to turn it in situation 0, to turn off bolts of fastening of a bracket of the switch, to remove it, and then and the ignition switch.

3. Installation of the switch of ignition is made as it should be, the return to removal.

Dismantling

PERFORMANCE ORDER

1. For dismantling of the switch of ignition to disconnect wires from a block (see rice. KZ813 ignition switch details), to turn a key in situation 0, to unscrew the screw of fastening of the lock, to drown the fixing pin and to take out the lock with a contact part from the case 2.

2. To unscrew the screw of fastening and to disconnect contact part 3 from the lock 5. To remove plastic facing 4.

Assembly and installation

Assembly and installation of the switch of ignition should be made as it should be, the return to dismantling and removal.

11.7.1. Ignition switch

11.7.3. Lighting and light alarm system