Removal and installation of a heater. AZLK 2141 (Muscovite)
Service and car repairs of 2141 - the Muscovite.
1. General data
2. Engines
3. Power supply system
4. Cooling system
5. Transmission
6. Running gear
7. Tires, wheels
8. Steering
9. Brake management
10. Body
10.1. Features of a design of bodies of cars of fashion. 2141-01, 2335 and their modifications
10.2. Body fittings
10.3. Dashboard
10.4. Ventilation and heating
10.4.1. Removal and installation of the fan of a heater
10.4.2. Removal and installation of a heater
10.4.3. Dismantling and assembly of a heater
11. Electric equipment
12. Electrical circuitries
 










fd148775

10-4-2-snyatie-i-ustanovka-otopitelya.html

10.4.2. Removal and installation of a heater

View of a heater from a motor compartment

1 – percussion cap of fastening of a guard;
2 – the water taking away guard;
3 – resistor;
4 – screw of fastening of the resistor;
5 – nut lamb

View of the air distributor and heater from salon of a body

1 – air distributor;
2 – the cap-type nut;
3 – brackets of fastening of covers of drafts;
4 – levers of the drive of gates of a heater

Removal

PERFORMANCE ORDER
1. To remove the dashboard.
2. To merge liquid from the engine cooling system.
3. To remove the water taking away guard 2 (see rice. A view of a heater from a motor compartment), having disconnected previously percussion caps 1 it fastening.
4. To disconnect electric wires from the resistor 3 and the electric motor of the fan.
5. To disconnect the taking-away and bringing hoses from a motor compartment.
6. To disconnect from the air distributor 1 (see rice. A view of the air distributor and a heater from salon of a body) a heater, having turned off four cap-type nuts 2 of salon of a body and the panel of control levers a heater.
7. To turn off two nuts lambs 5 (see rice. A view of a heater from a motor compartment) from a motor compartment and to remove a heater.
8. To make installation of a heater upside-down.
9. After installation and connection of hoses to fill the engine cooling system with cooling liquid and to check tightness of connections and reliability of an inhaling of coupling collars.


10.4.1. Removal and installation of the fan of a heater

10.4.3. Dismantling and assembly of a heater