| 
   1-2-tekhnicheskie-dannye-i-kharakteristiki-avtomobilejj-moskvich.html 
1.2. Specifications and characteristics of cars <>
   
    | PARAMETER  | 
       CAR MODEL 
   |  
   
    | 
       2141-01   
     | 
       21412-01   
     |  
       214122   
     |  
       214123   
     |  
   
    Body type 
     | 
       Closed bearing five-door the hatchback type   
     |  
   
    Engine 
     | 
       VAZ-2106 *  
     | 
       UZAM-331 *  
     | 
       UZAM-3317 *  
     | 
       UZAM-3313 *  
     |  
   
    | Total number of places and mass of the transported freight   |  
       5 and 50 kg or 2 and 260 kg 
   |  
   
    |  
       Mass of the car, kg:  
     |  
   
    |    equipped     
     |  
       1055 
     |  
       1080 
   |  
   
       with full loading  
     |  
       1455  
     |  
       1480  
   |  
   
    |  
       The admissible full mass of the towed trailer at movement along roads with a hard coating, kg, no more:  
     |  
   
    |    equipped with the brake system at a bias of the road to 8%   |  
       1000 
   |  
   
       equipped with the brake system at a bias of the road to 12% 
     |  
       850 
   |  
   
    |    not equipped with the brake system   |  
       350 
   |  
   
    | The smallest road gleam under a muffler pipe in the middle of base at full loading of the car with tires 165/80 R14, mm   |  
       140 
   |  
   
    | The smallest radius of turn of the car, m, no more   |  
       4,9 
   |  
   
    | Maximum speed   |  
       155  
     |  
       150  
     |  
       157  
     |  
       157  
   |  
   
    | Time of dispersal of the car from the place with the driver and one passenger, sec., no more   |  
       to the speed of 100 km/h 
   |  
   
    |  
       15,5  
     |  
       18 
     |  
       15,8  
     |  
       15,0  
   |  
   
    | The maximum rise overcome by the car with full loading on the site with a dry and hard coating without dispersal, %, not less   |  
       30  
   |  
   
    | Brake way of the car with full loading at cold brake mechanisms on the dry horizontal section of the asphalted road from the speed of 80 km/h to a full stop, m, no more   |  
       43,2 
   |  
   
    | Overall dimensions, mm   |  
      
   |  
 
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    |  
       2335  
     |  
       23352  
     |  
       233522  
     |  
       233523  
   |  
   
    Body type 
     |  
       Closed bearing two-door the pickup type   
   |  
   
    Engine 
     |  
       VAZ-2106  
     |  
       VAZ-2106  
     |  
       UZAM-3317  
     |  
       UZAM-3313  
   |  
   
    | Total number of places and mass of the transported freight   |  
       2 and 500 kg 
   |  
   
    |  
       Mass of the car, kg:  
   |  
   
    |    equipped   |  
       990  
     |  
       1000  
   |  
   
       with full loading  
     |  
       1630  
     |  
       1640  
   |  
   
    |  
       The admissible full mass of the towed trailer at movement along roads with a hard coating, kg, no more:  
   |  
   
    |    equipped with the brake system at a bias of the road to 8%   |  
       1000  
   |  
   
       equipped with the brake system at a bias of the road to 12% 
     |  
       850  
   |  
   
    |    not equipped with the brake system   |  
       350  
   |  
   
    | The smallest road gleam under a muffler pipe in the middle of base at full loading of the car with tires 165/80 R14, mm   |  
       160  
   |  
   
    | The smallest radius of turn of the car, m, no more   |  
       5,5  
   |  
   
    | Maximum speed   |  
       143  
     |  
       140  
     |  
       145  
     |  
       145  
   |  
   
    | Time of dispersal of the car from the place with the driver and one passenger, sec., no more   |  
       to the speed of 80 km/h 
   |  
   
    |  
       14,5  
     |  
       15  
     |  
       14,2  
     |  
       14,0  
   |  
   
    | The maximum rise overcome by the car with full loading on the site with a dry and hard coating without dispersal, %, not less   |  
       30  
   |  
   
    | Brake way of the car with full loading at cold brake mechanisms on the dry horizontal section of the asphalted road from the speed of 80 km/h to a full stop, m, no more   |  
       43,2  
   |  
   
    | Overall dimensions, mm   | see rice. Overall dimensions of cars of models 2335; 23352; 233522, 233523  
   |  
   
    |  
       * Further in the text: fashion. 2106; fashion. 331; fashion. 3317; fashion. 3313.  
    
   |  
 
 
Engine 
 
 
   
    |  
       PARAMETER  
    
     |  
       CAR MODEL 
   |  
   
    |  
       2141-01   
    
     |  
       21412-01   
    
     |  
       214122   
    
     |  
       214123   
    
   |  
   
    | Model   |  
       2106  
    
     |  
       331  
    
     |  
       3317  
    
     |  
       3313  
    
   |  
   
    | Type   | 
       Four-cycle, petrol, carburetor  
     |  
   
    | The applied fuel   | 
       Automobile gasoline with octane number not less than 92   
     |  
       Automobile AI-80 gasoline  
     |  
   
    | Number and arrangement of cylinders   |  
       Four in a row 
    
     | 
       Four in a row a subcorner 20  to a vertical 
    
   |  
   
    Diameter of the cylinder, mm 
     |  
       72  
     |  
       82  
     |  
       85  
     |  
       85  
   |  
   
    | Piston stroke, mm   |  
       80  
     |  
       70  
     |  
       75  
     |  
       80  
   |  
   
    | Volume of cylinders, l   |  
       1,57  
     |  
       1,48  
     |  
       1,7  
     |  
       1,81  
   |  
   
    | Extent of compression   |  
       8,5  
     |  
       9,5  
     |  
       8,5  
     |  
       7,2 
      
   |  
   
    Rated power gross (State standard specification 14846-81), not less, than a kW (h.p.)/frequency of rotation of a bent shaft, rpm 
     |  
       56,3 (76,4) /  5400 
     |  
       52,9 (72) /  5500 
     |  
       62,5 (85) /  5400 
     |  
       62,5 (85) /  5300 
   |  
   
    | Maximum torque gross (State standard specification 14846-81), not less, than A N  m (kgf  l) / frequency of rotation of a bent shaft, rpm   |  
       121 (12,4) /  3000 
     |  
       105,8 (10,8) /  3200  
     |  
       130,4 (13,3) /  3200  
     |  
       132 (13,5) /  3200  
     |  
   
    | Operating procedure of cylinders   |  
       1342  
   |  
 
 
   
    | PARAMETER  | 
       CAR MODEL 
    
   |  
   
    |  
       2335  
     |  
       23352  
     |  
       233522  
     |  
       233523   
   |  
   
    | Model   |  
       2106  
     |  
       331  
     |  
       3317  
     |  
       3313  
   |  
   
    | Type   |  
       Four-cycle, petrol, carburetor  
   |  
   
    | The applied fuel   |  
       Automobile gasoline with octane number not less than 92   
     |  
       Automobile AI-80 gasoline 
   |  
   
    Number and arrangement of cylinders 
    
     |  
       Four in a row  
     |  
       Four in a row at an angle 20  to a vertical 
   |  
   
    Diameter of the cylinder, mm 
    
     |  
       72  
     |  
       82  
     |  
       85  
     |  
       85  
   |  
   
    | Piston stroke, mm   |  
       80  
     |  
       70  
     |  
       75  
     |  
       80  
   |  
   
    | Volume of cylinders, l   |  
       1,57  
     |  
       1,48  
     |  
       1,7  
     |  
       1,81  
   |  
   
    | Extent of compression   |  
       8,5  
     |  
       9,5  
     |  
       8,5  
     |  
       7,2 
      
   |  
   
    | Rated power gross (State standard specification 14846-81), not less, than a kW (h.p.)/frequency of rotation of a bent shaft, rpm  
  |  
       56,3 (76,4) /  5400 
     |  
       52,9 (72) /  5500 
     |  
       62,5 (85) /  5400 
     |  
       62,5 (85) /  5300 
   |  
   
    | The maximum torque gross (State standard specification 14846-81), not less, than A N  m (kgf  l) / frequency of rotation of a bent shaft, about / mines   |  
       121 (12,4) /  3000 
     |  
       105,8 (10,8) /  3200  
     |  
       130,4 (13,3) /  3200  
     |  
       132 (13,5) /  3200  
   |  
   
    | Operating procedure of cylinders   |  
       1342  
   |  
 
 
Transmission  
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    |  
       2141-01, 21412-01, 214122, 214123, 2335, 23352, 233522, 233523   
    
   |  
   
    | Coupling   |  
       One-disk, dry.  Coupling switching off drive mechanical, hummock  
    
   |  
   
    | Transmission   |  
       Mechanical, five-step, with synchronizers  inclusions of transfers of the forward course  
    
   |  
   
    |  
       Transfer numbers of the transmission:  
   |  
   
    |    the first   |  
       3,308  
   |  
   
    |    the second   |  
       2,050  
   |  
   
    |    the third   |  
       1,367  
   |  
   
    |    the fourth   |  
       0,946  
   |  
   
    |    the fifth   |  
       0,732  
   |  
   
    |  
          backing  
     |  
       3,357 
   |  
 
 
Running gear 
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    |  
       2141-01, 21412-01,   214122, 214123   
     |  
       2335, 23352, 
        233522, 233523   
   |  
   
    | Main transfer   |  
       Unary, with gipoidny gearing of cogwheels  
   |  
   
    | Transfer number of the main transfer   |  
       4,22  
     |  
       4,55  
   |  
   
    | Forward suspension bracket   |  
       Independent, spring with telescopic racks on cross levers, with the stabilizer of cross stability  
   |  
   
    | Back suspension bracket   |  
       Dependent, lever and spring, with the stabilizer in a beam, with a cross bar  
     |  
       Dependent, spring, semielliptical spring with a podressornik   
   |  
   
    | Wheel rim   |  
       5Jx14  
   |  
   
    | Tires:   |  
   
    |    type   |  
       Radial, chamber  
   |  
   
    |    drawing of a protector   |  
       Road with the wear indicator  
   |  
   
    |    designation   | 165/80 R14   |  
   
    |  
       ** Fuel consumption are comparative characteristics and cannot be considered as operational norm.  
    
   |  
 
 
Steering 
 
   
    | PARAMETER  |  
       CAR MODEL 
   |  
   
    |  
       2141-01, 21412-01, 214122, 214123, 2335, 23352, 233522, 233523
  
       
     |  
   
    | Type of the steering mechanism   |  
       Gear wheel lath 
       
   |  
   
    | Transfer relation on average situation   |  
       24:1 
       
   |  
   
    |  
       Steering column 
     |  
       It is equipped with the anti-theft device integrated with the ignition lock  
   |  
 
Brake system 
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    |  
       2141-01, 21412-01, 214122, 214123, 2335, 23352, 233522, 233523
  
       
     |  
   
    | Working brake system   |  
       Forward brake   disk.   Back brake   drum kolodochny  
   |  
   
    | Brake drive   |  
       Hydraulic, separate, double-circuit with two-chamber   
   |  
   
    |  
       Parking brake system:  
   |  
   
       brake mechanisms 
     |  
       Drum, kolodochny on back wheels  
   |  
   
    |  
          brake drive 
     |  
       Mechanical, hummock type 
   |  
 
Electric equipment 
 
   
    | PARAMETER   |  
       CAR MODEL  
   |  
   
    |  
       2141-01  
     |  
       21412-01  
     |  
       214122  
     |  
       214123  
   |  
   
    System of an electrical wiring 
     |  
       Single-wire, the negative pole of sources of current is connected to weight  
   |  
   
    | Rated voltage, In   |  
       12  
   |  
   
    | Rechargeable battery   |  
       6ST-55 or 6ST-55A3  
   |  
   
    |  
       Generator  
     |  
        About-222  
     |  
       581.37  
   |  
   
    |  
       Alternating current with the built-in rectifier, the integrated regulator of tension and the condenser  
   |  
   
    | Rated voltage, In   |  
       14  
   |  
   
    Maximum current, And 
     |  
       47  
     |  
       50  
   |  
   
    Starter 
     |  
       35.3708  
     |  
       ST 4216.3708  
   |  
   
    | Rated power, kW   |  
       1,3  
     |  
       1,5  
   |  
   
    System of ignition 
     |  
       Contact  
     |  
       MPSZ  
   |  
   
    | Ignition distributor   |  
       30,371  
     |  
       47,371  
     |  
         
   |  
   
    |  Coil   |  
       B-117A  Without additional resistance  
     |  
       B-115V  With an additional resistance  
     |  
       3022.3705  (2 pieces)  
   |  
   
    | Controller of electronic ignition   |  
         
     |  
         
     |  
       MZ 313  
   |  
   
    | Candles   |  
       A17DB   (A7, 5XC)  
     |  
       A20D  A20D1  
     |  
       A17DB  with M14x25 carving  
   |  
   
    | Switch (lock) of ignition   |  
       Combined with the starter switch, with the built-in anti-theft device and the blocking which is not allowing to include a starter at the working engine  
   |  
   
    | Sound signal   |  
       C309, electromagnetic, high tonality  
   |  
   
    | Lighting devices   |  
       The head headlights including a halogen lamp of near and far light and a lamp of a marker light; the back lamps including sections of a marker light with red lenses and backing light sections with colourless lenses; plafonds of internal illumination of salon; figurative lamp; podkapotny lamp; lighter nest lighting lamp; plafond of lighting of the luggage compartment; plafond of illumination of a ware box; lighting lamp of the panel of control levers heater  
   |  
   
    | Devices of the light alarm system   |  
       Lamps of forward indexes of turn; side indexes of turn with orange lenses; sections of indexes of turn with orange lenses, a braking signal with red lenses, fog light with red lenses in back lamps  
   |  
   
    | Instrumentations   |  
       The combination of devices 2122.3801 uniting a speedometer with counters of a daily and total run; tachometer; voltmeter; ; indexes of level of fuel in a tank, engine cooling system temperatures; control lamps of critical condition of the working brake system and turning on of the parking brake system, the reserve rest of fuel in a tank; alarm lamps of closing of the air gate of the carburetor; inclusions of driving beam of headlights, external lighting, indexes of turn  
   |  
   
    | Lighter   |  
       11.3725, electric, it is installed on dashboards   
   |  
   
    | Screen wiper   |  
       31.5205, with two brushes, the electric drive which electric motor has two high-speed and one faltering operating mode, a thermobimetallic safety lock in an electric motor power-supply circuit  
   |  
   
    | Radio receiver   |  
       "Bylina-207-07", groups of complexity II, four-band (DV, SV, KV, VHF)  
   |  
   
    | Loudspeaker   |  
       4GD-53  
   |  
   
    |  Antenna   |  
       AR-08, external, telescopic, shtyrevy  
   |  
 
 
   
    | PARAMETER   |  
       CAR MODEL  
   |  
   
    |  
       2335  
    
     |  
       23352  
    
     |  
       233522  
    
     |  
       233523  
    
   |  
   
    System of an electrical wiring 
     |  
       Single-wire, the negative pole of sources of current is connected to weight  
   |  
   
    | Rated voltage, In   |  
       12  
   |  
   
    | Rechargeable battery   |  
       6ST-55 or 6ST-55A3  
   |  
   
    |  
       Generator  
     |  
       G-222  
     |  
       581.37  
   |  
   
    |  
       Alternating current with the built-in rectifier, the integrated regulator of tension and the condenser  
   |  
   
    | Rated voltage, In   |  
       14  
   |  
   
    Maximum current, And 
     |  
       47  
     |  
       50  
   |  
   
    Starter 
     |  
       35.3708  
     |  
       ST 4216.3708  
   |  
   
    | Rated power, kW   |  
       1,3  
     |  
       1,5  
   |  
   
    System of ignition 
     |  
       Contact  
     |  
       MPSZ  
   |  
   
    | Ignition distributor   |  
       30,371  
     |  
       47,371  
     |  
         
   |  
   
    |  Coil   |  
       B-117A  Without additional resistance  
     |  
       B-115V  With an additional resistance  
     |  
       3022.3705  (2 pieces)  
   |  
   
    | Controller of electronic ignition   |  
         
     |  
         
     |  
       MZ 313  
   |  
   
    | Candles   |  
       A17DB   (A7, 5XC)  
     |  
       A20D  A20D1  
     |  
       A17DB  with M14x25 carving  
   |  
   
    | Switch (lock) of ignition   |  
       Combined with the starter switch, with the built-in anti-theft device and the blocking which is not allowing to include a starter at the working engine  
   |  
   
    | Sound signal   |  
       C309, electromagnetic, high tonality  
   |  
   
    | Lighting devices   |  
       The head headlights including a halogen lamp of near and far light and a lamp of a marker light; the back lamps including sections of a marker light with red lenses and backing light sections with colourless lenses; plafonds of internal illumination of salon; figurative lamp; podkapotny lamp; lighter nest lighting lamp; plafond of lighting of the luggage compartment; plafond of illumination of a ware box; lighting lamp of the panel of control levers heater  
   |  
   
    | Devices of the light alarm system   |  
       Lamps of forward indexes of turn; side indexes of turn with orange lenses; sections of indexes of turn with orange lenses, a braking signal with red lenses, fog light with red lenses in back lamps  
   |  
   
    | Instrumentations   |  
       The combination of devices 2122.3801 uniting a speedometer with counters of a daily and total run; tachometer; voltmeter; ; indexes of level of fuel in a tank, engine cooling system temperatures; control lamps of critical condition of the working brake system and turning on of the parking brake system, the reserve rest of fuel in a tank; alarm lamps of closing of the air gate of the carburetor; inclusions of driving beam of headlights, external lighting, indexes of turn  
   |  
   
    | Lighter   |  
       11.3725, electric, it is installed on dashboards   
   |  
   
    | Screen wiper   |  
       31.5205, with two brushes, the electric drive which electric motor has two high-speed and one faltering operating mode, a thermobimetallic safety lock in an electric motor power-supply circuit  
   |  
   
    | Radio receiver   |  
       "Bylina-207B-07", groups of complexity II, four-band (DV, SV, KV, VHF)  
   |  
   
    | Loudspeaker   |  
       4GD-53  
   |  
   
    |  Antenna   |  
       AR-08, external, telescopic, shtyrevy  
   |  
 
 
Body 
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    | 21412-01, 21412-01, 214122, 214123  
     | 2335, 23352, 233522, 233523  
   |  
   
    |  
       Design 
     | All-metal, bearing, five-door   | All-metal, bearing, two-door   |  
   
    |  
       Glazing 
     | 
       Glass of a wind window bent, three-layer, the triplex type, the back door window glass tempered with heating; lowering glasses of forward and back doors, glasses of windows of sidewalls tempered  
     | 
       Glass of a wind window bent, the lowering glasses of forward and back doors, glass of a back back of a cabin tempered  
     |  
   
    | Ventilation   | 
       Stitched, working at the expense of a stream of counter air at the movement of the car, or compulsory, working at the switched-on heater fan at the motionless car; an air intake through cracks in the external panel of a front before glass of a wind window, distribution of air in salon through vozdukhooduva on dashboards and a forward airspray.   
     |  
   
    | Plumage   | 
       Forward wings removable  
     |  
   
    |  
       Equipment 
      
     | 
       Body heater, washer of glass of a wind window; a ware box with a cover and a lock, cavities in a casing of a floor and upholsteries of forward doors; two ashtrays; hand-rail over the top part of an aperture of back doors; two antisolar peaks; seat belts; head restraints of front seats; rugs on a floor in salon and in the luggage compartment; internal rear-view mirror; external rear-view mirrors on a door of the driver and on a forward door of the passenger   
     |  
      
      
      
       Body heater, washer of glass of a wind window; a ware box with a cover and a lock, cavities in a casing of a floor and pockets in upholsteries of doors; ashtray; two antisolar peaks; seat belts; head restraints; rugs on a floor; internal rear-view mirror; external rear-view mirrors on side doors. 
       
      
      
      
    
   |  
 
 
Filling volumes (nominal, k)  
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    | 
       2141-01, 21412-01, 214122, 214123  
     | 
       2335, 23352, 233522, 233523  
     |  
   
    |  
       Fuel tank: 
     |  
   
    |  
        metal 
     |  
       52  
     |  
       50  
   |  
   
    |  plastic   |  
       55  
     |  
      
   |  
   
    The engine cooling system with a body heater 
     |  
       10  
     |  
       10  
   |  
   
    |  
       Lubricant system of the engine:  
     |  
   
    |    for fashion. 2141-01 and 2335   |  
       4,2  
   |  
   
       for fashion. 21412-01, 214122,  23352, 233522 
     |  
       4,8  
   |  
   
    Case of the main transfer and transmission 
     |  
       3,4  
     |  
       3,4  
   |  
   
    | Hydraulic actuator of the working brake system   |  
       0,65  
     |  
       0,65  
   |  
   
    | Damping rack of a forward suspension bracket   |  
       0,340  0,005  
     |  
       0,340  0,005  
   |  
   
    | Shock-absorber of a back suspension bracket   |  
       0,230  0,005  
     |  
       0,198  0,003  
   |  
   
    | Washer reservoir of glass of a wind window   |  
       2  
     |  
       2  
   |  
   
    | Steering mechanism,   |  
         25 - 30  
     |  
         25 - 30  
   |  
   
    | Rechargeable battery   |  
       3,8  
     |  
       3,8  
   |  
 
Specification for adjustment and control 
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    |  2141-01   
     | 21412-01   
     | 214122   
     | 214123   
   |  
   
    |  
       Control fuel consumption ***, l on 100 km, no more, at speeds of the movement, km/h  
     |  
   
    |    at a speed of movement of 90 km/h   |  
       5,8  
     |  
       6  
     |  
       6,1  
     |  
       6,3  
   |  
   
    |    at a speed of movement of 120 km/h   |  
       8  
     |  
       8,2  
     |  
       7,9  
     |  
       8,8  
   |  
   
    | Fuel consumption in a city cycle at the stand, l / 100 km, no more   |  
       10  
     |  
       10,2  
     |  
       10,2  
     |  
       11,0  
   |  
   
    |  
       Gaps in the mechanism of the drive of valves (at a temperature of a head of the block of cylinders of 15-20 C), mm:  
     |  
   
    |    between cams and levers   |  
       0,15  
     |  |  
   
    |    between tips of press screws of yokes and cores of valves   |  
        
         
     |  
       0,15  
   |  
   
    |  
       Deflection, mm. the middle of a branch of a belt between a pulley of the water pump and a pulley of the generator under the influence of force:  
     |  
   
    |    100 N (10 kgfs)   |   10 - 15   |    
   |  
   
    |    N (3.9 kgfs)   |  | 
       8  1 
   |  
   
    | Temperature of cooling liquid of the engine, C   |  
                 80 - 100  
   |  
   
    | Antifreeze density at a temperature of 20 C. / .: filled in on zavodetosol-A40   |  
               1,05 - 1,085  
   |  
   
    | Level of cooling liquid in a broad tank on the cold engine   |         0 - 10 mm are lower than a welded seam of the top and lower half of a broad tank 
        
   |  
   
    | Temperature began opening of the valve of the thermostat, C   |  
               80  2 
       
   |  
   
    | The Corner of the Closed Condition of Contacts (CCCC) of the breaker at (1000100) rpm of a shaft of the distributor of ignition ***)   |  
       55   3   
    
     |  
       50   2 30  
     |  
       50   2 30  
     |  
         
   |  
   
    | Initial corner of an advancing of ignition to VMT,    |  
         3 - 5  
     |  
       10  
     |  
       10  
     |  
         
   |  
   
    | Gap between electrodes of a candle, mm   |  
       0,5  0,6  
    
     |  
        0,8  0,95  
    
   |  
   
    |  
               Content in the fulfilled engine gases with a frequency of rotation of a bent shaft (850  50) rpm:  
     |  
   
    | WITH, %, no more   |  
               1,5  
   |  
   
    | CH, 1/one million, no more   |  
               1200  
   |  
   
    |  
       The same, with a frequency of rotation of a bent shaft 3200 + 100 rpm (for fashion. 2141-01) and 3300  100 rpm (for fashion. 21412-01, 214122, 214123):  
     |  
   
    | WITH, %, no more   |  
       2 
   |  
   
    | CH, 1/one million, no more   |  
       600 
   |  
   
     Working course of the external lever of a shaft of switching off of coupling, mm 
     |  
         17 - 19  
   |  
   
    | Wear of the tire up to the depth of a flute of a protector of the tire, mm, not less   |  
       1,6  
   |  
   
    |  
       Air pressure in cold tires of wheels 165/80 R14, MPa (kgf/cm2):  
     |  
   
    |    lobbies   |  
       0,19 (1,9)  
   |  
   
    |    back   |  
       0,17 (1,7) 
   |  
   
    |  
       The same, wheels 175/80 R14, MPa, kgf/cm2:  
     |  
   
    |    lobbies   | 
       0,18 (1,8) 
    
   |  
   
    |    back   | 
       0,17 (1,8) 
    
   |  
   
    |  
       The angles of installation of forward wheels for the car of full weight:   
     |  
   
    |    disorder   |  
          0 30 ' 30  
   |  
   
    |    longitudinal inclination of an axis of turn of a wheel   |  
       1 20 ' 30 
       
   |  
   
    | Difference of corners (no more):   |  
   
    |    disorder of the right and left wheels of a longitudinal inclination of axes   |  
       0 30  
   |  
   
    |    turn of the right and left wheels   |  
       0 30 
       
   |  
   
    |  
       Convergence of forward wheels for the car with full loading at measurement:  
     |  
   
    |    one wheel at the stand   | 
          0 10  5  
    
   |  
   
    |    telescopic line of two wheels, mm   | 
          2  0,5  
    
   |  
   
    | Level of brake fluid in a nutritious tank of the main cylinder of a brake   |  
       Between tags of MAX and MIN  
   |  
   
    |  
       Thickness of a frictional overlay of the brake mechanism, mm, not less:  
     |  
   
    |    disk   |  
       3  
   |  
   
    |    drum   |  
       1,5 
   |  
   
    | Wear of a brake disk, on the party, mm, no more   |  
       0,5  
   |  
   
    |  
         The most admissible angle of free turn of a steering wheel (free wheeling of a steering wheel) in the situation corresponding to the movement on a straight line, , no more 
     |  
        10  
   |  
 
 
   
    | PARAMETER   |  
       CAR MODEL 
   |  
   
    |  
       2335  
     |  
       23352  
     |  
       233522 
     |  
       233523 
   |  
 
   
    |  
       Control fuel consumption ***, l on 100 km, no more, at speeds of the movement, km/h:  
     |  
   
    |    at a speed of movement of 90 km/h   |  
       7,0 
     |  
       7,1 
     |  
       7,2 
     |  
       7,3 
   |  
   
    |    at a speed of movement of 120 km/h   |  
       10 
     |  
       10,1 
     |  
       10 
     |  
       10,3 
   |  
   
    | Fuel consumption in a city cycle at the stand, l / 100 km, no more   |  
       11,0 
     |  
       10,1 
     |  
       10,0 
     |  
       11,2 
   |  
   
    |  
       Gaps in the mechanism of the drive of valves (at a temperature of a head of the block of cylinders of 15-20 C), mm:  
     |  
   
    |    between cams and levers   |  
       0,15  
     |  |  
   
    |    between tips of press screws of yokes and cores of valves   |  
        
         
     |  
       0,15  
   |  
   
    |  
       Deflection, mm. the middle of a branch of a belt between a pulley of the water pump and a pulley of the generator under the influence of force:  
     |  
   
    |    100 N (10 kgfs)   | 
         10 - 15  
     |    
   |  
   
    |    N (3.9 kgfs)   |  | 
       8  1 
   |  
   
    | Temperature of cooling liquid of the engine, C   |  
                 80 - 100  
   |  
   
    | Antifreeze density at a temperature of 20 C. / .: filled in on zavodetosol-A40   |  
               1,05 - 1,085  
   |  
   
    | Level of cooling liquid in a broad tank on the cold engine   |       010 mm are lower than a welded seam of the top and lower half of a broad tank 
        
   |  
   
    | Temperature began opening of the valve of the thermostat, C   |  
               80  2 
       
   |  
   
    | The Corner of the Closed Condition of Contacts (CCCC) of the breaker at (1000100) rpm of a shaft of the distributor of ignition ***)   |  
       55   3   
     |  
       50   2 30  
     |  
       50   2 30  
     |  
         
   |  
   
    | Initial corner of an advancing of ignition to VMT,    |  
       3  5  
     |  
       10  
     |  
       10  
     |  
         
   |  
   
    | Gap between electrodes of a candle, mm   |  
        0,5 - 0,6  
     |  
          0,8 - 0,95  
   |  
   
    |  
               Content in the fulfilled engine gases with a frequency of rotation of a bent shaft (850  50) rpm:  
     |  
   
    | WITH, %, no more   |  
               1,5  
   |  
   
    | CH, 1/one million, no more   |  
               1200  
   |  
   
    |  
       The same, with a frequency of rotation of a bent shaft 3200 + 100 rpm (for fashion. 2141-01) and 3300 100 rpm (for fashion. 21412-01, 214122, 214123):  
     |  
   
    | WITH, %, no more   |  
       2 
   |  
   
    | CH, 1/one million, no more   |  
       600 
   |  
   
     Working course of the external lever of a shaft of switching off of coupling, mm 
    
     |  
         17 - 19  
   |  
   
    | Wear of the tire up to the depth of a flute of a protector of the tire, mm, not less   |  
       1,6  
   |  
   
    |  
       Air pressure in cold tires of wheels 165/80 R14, MPa (kgf/cm2):  
     |  
   
    |    lobbies   |  
       0,23 (2,3) 
   |  
   
    |    back   |  
       0,32 (3,2) 
   |  
   
    |  
       The same, wheels 175/80 R14, MPa, kgf/cm2:  
     |  
   
    |    lobbies   |  
       0,23 (2,3) 
   |  
   
    |    back   |  
       0,32 (3,2) 
   |  
   
    |  
       The angles of installation of forward wheels for the car of full weight:   
     |  
   
    |    disorder   |  
        0 30 ' 30  
   |  
   
    |    longitudinal inclination of an axis of turn of a wheel   |  
       1 20 ' 30 
       
   |  
   
    |  
       Difference of corners (no more):  
     |  
   
    |    disorder of the right and left wheels of a longitudinal inclination of axes   |  
       0 30  
   |  
   
    |    turn of the right and left wheels   |  
       0 30 
       
   |  
   
    |  
       Convergence of forward wheels for the car with full loading at measurement:  
     |  
   
    |    one wheel at the stand   |  
          0 10  5  
   |  
   
    |    telescopic line of two wheels, mm   |  
        2  0,5  
   |  
   
    | Level of brake fluid in a nutritious tank of the main cylinder of a brake   |  
       Between tags of MAX and MIN  
   |  
   
    |  
       Thickness of a frictional overlay of the brake mechanism, mm, not less:  
     |  
   
    |    disk   |  
       3  
   |  
   
    |    drum   |  
       1,5 
   |  
   
    | Wear of a brake disk, on the party, mm, no more   |  
       0,5  
   |  
   
    |  
         The most admissible angle of free turn of a steering wheel (free wheeling of a steering wheel) in the situation corresponding to the movement on a straight line, , no more 
     |  
        10  
   |  
 
  *** In the absence of the equipment for control of UZSK it is allowed to measure a gap between contacts of the breaker which has to be: for the engine of fashion.  2106 - (0,40,05) mm; for engines of fashion. 331 and 3317  (0,450,05) mm. 
	
  
 | 
 
 
  
  
  
	 |